Manual.ly Logo

Bosch DIY EasyDrill 1200 Manual

0,0 · 0 Evaluări

Manual PDF · 215 pagini

Română

M: OA-GPT-54-NAN
pagină

/ 215

Loading...
373598f794fee1c172941749f256260fbe1b page 11
English | 17
Operation
Starting Operation
Inserting the battery
Note: The use of batteries unsuitable for your power tool can
lead to malfunctions or damage to the power tool.
Set the rotational direction switch (6) to the middle position
to avoid unintentionally switching it on. Insert the charged
battery (8) into the handle until you feel it engage and it is
flush with the handle.
Setting the rotational direction (see figureC)
The rotational direction switch (6) is used to change the ro-
tational direction of the power tool. However, this is not pos-
sible while the on/off switch (10) is being pressed.
Right rotation: To drill and to drive in screws, press the ro-
tational direction switch (6) through to the left stop.
Left Rotation: To loosen and unscrew screws and nuts,
press the rotational direction switch (6) through to the right
stop.
Setting the Operating Mode
Drilling
EasyDrill 1200:
Set the torque presetting ring(3) to the
"drilling" symbol.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "drilling" symbol.
Screwdriving
EasyDrill 1200:
Set the torque presetting ring(3) to the re-
quired torque.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "screwdriving" symbol.
Set the torque presetting ring(3) to the re-
quired torque.
Impact drilling
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "impact drilling" symbol.
Preselecting the Torque
The torque presetting ring (3) can be used to preselect the
required torque in 20 stages. When the correct setting is
used, the application tool will be stopped when the screw is
driven flush into the material or once the set torque has been
reached. In position the overload clutch is deactivated,
e.g. for drilling.
When unscrewing screws, you can select a higher setting or
set the tool to the symbol.
Adjusting the Speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch (10) to varying extents.
A light pressure on the on/off switch (10) results in a low ro-
tational speed. Increased pressure on the switch causes an
increase in speed.
Adjusting the Speed/Impact Rate (EasyImpact1200)
You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch (10) to varying ex-
tents.
Applying light pressure to the on/off switch (10) results in a
low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.
Mechanical gear selection
u Only operate the gear selector (5) when the power
tool is not in use.
You can preselect two speed ranges with the gear selector
(5).
Gear I:
Low speed range; for screwdriving or working with a large
drilling diameter.
Gear II:
High speed range; for working with a small drilling diameter.
If the gear selector switch (5) cannot be pushed all the way,
turn the tool holder (1) with the application tool slightly.
Switching on/off
To start the power tool, press and hold the on/off switch
(10).
The lamp (11) lights up when the on/off switch (10) is lightly
or fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To switch off the power tool, release the on/off switch (10).
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder(1), are
locked when the on/off switch (10) is not pressed.
This enables screws to be screwed in even when the battery
(8) is empty and allows the power tool to be used as a
screwdriver.
Run-out brake
Upon releasing the on/off switch (10), the drill chuck is
slowed down, which prevents the application tool from con-
tinuing to rotate.
When driving in screws, you should therefore only release
the on/off switch (10) once the screw has been inserted
flush into the workpiece. This way, the head of screw will not
penetrate the workpiece.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be over-
loaded. In the event of heaving loading or the temperature
rising/falling outside the permitted battery temperature
range, the speed will be reduced. The power tool will not run
at full speed again until the permitted battery temperature
has been reached.
Bosch Power Tools 1 609 92A 7WD | (20.06.2022)

Discută cu manualul Bosch DIY EasyDrill 1200 folosind AI

Obține răspunsuri instantanee de la AI din manualul Bosch DIY EasyDrill 1200

Întreabă orice despre Bosch DIY EasyDrill 1200. Răspunsurile provin din acest manual, împreună cu paginile pe care se bazează.

EasyDrill 1200 Program de intretinere

După utilizare prelungită la viteză redusă
Răciți uneltele

Funcționați unealta la viteza maximă fără sarcină timp de aproximativ 3 minute pentru a o răci după lucrul la viteze reduse pentru o perioadă lungă.

Afiseaza in manual (pagina 17)
Înainte de fiecare utilizare sau după nevoie
Verificați părțile mobile și starea

Verificați că părțile mobile funcționează corespunzător fără blocare și că nu există părți sparte sau deteriorate înainte de utilizare.

Afiseaza in manual (pagina 6)
După nevoie
Curățați unealta și fanta de ventilație

Mențineți unealta electrică și fantele de ventilație curate pentru a asigura o funcționare sigură și eficientă.

Afiseaza in manual (pagina 10)
M: QW-35-FL

Adresă o Întrebare

0/1000

Recomandați EasyDrill 1200?

Da Nu

Frequently Asked Questions

A

Acest perforator fara fir este conceput pentru gaurirea lemnului, metalului, ceramicii si plasticului. Nu este echipat pentru gaurirea cu impact in masonerie precum caramida sau piatra.

Este răspuns este util?

A

Localizeaza intrerupatorul de directie de rotatie pe partea de sus a manerului. Aluneca-l complet spre stanga pentru rotatia in sensul acelor de ceasornic (strangerea suruburilor) sau complet spre dreapta pentru rotatia in sens invers acelor de ceasornic (desfacerea suruburilor).

Este răspuns este util?

A

Da, selectand setarea de cuplu potrivita pe inelul de presetare. Pentru suruburi mari in materiale tari, se recomanda sa dai o gaura pilota inainte pentru a preveni craparea.

Este răspuns este util?

A

Produsul este livrat de obicei cu o baterie litiu-ion partial incarcata. Se recomanda sa o incarci complet inainte de prima utilizare pentru a asigura performanta maxima.

Este răspuns este util?

A

Selectorul de viteza iti permite sa alegi intre doua game de viteze. Viteza I este pentru viteza mica si cuplu mare, ideala pentru surubuire. Viteza II este pentru viteza mare, potrivita pentru gaurirea unor gauri mici.

Este răspuns este util?

A

Bateriile Bosch vin de obicei cu o perioada specifica de garantie. Te rugam sa verifici ambalajul sau site-ul oficial pentru durata exacta aplicabila in regiunea ta.

Este răspuns este util?

M: QW-35-FL

Avantaje și Dezavantaje

Avantaje

  • Design usor si ergonomic pentru manipulare confortabila
  • Cutia de viteze cu doua trepte ofera versatilitate pentru gaurire si surubuire
  • Lampa LED integrata imbunatateste vizibilitatea in spatiile intunecate
  • Mandrina fara cheie permite schimbari rapide si usoare ale bitelor
  • Protectia electronica a celulei previne descarcarea profunda a bateriei
VS

Dezavantaje

  • Nu este potrivit pentru gaurirea grea in masonerie fara functie de impact
  • Capacitatea bateriei poate fi insuficienta pentru joburi continue foarte lungi
  • Limita de cuplu ar putea fi mai mica decat modelele de grad profesional
M: QW-35-FL

Produs Specificație

Tip

Șurubelniță

M: QW-35-FL

Produs Descriere

Descopera Puterea Bosch DIY EasyDrill 1200

Perforatorul fara fir Bosch DIY EasyDrill 1200 este o dovada a ingineriei de precizie conceputa special pentru entuziastii de imbunatatiri ale casei. Acest instrument versatil combina fiabilitatea cu usurinta in utilizare, facandu-l o adaugare esentiala la orice trusa DIY. Indiferent daca asamblezi mobila, atarni rafturi sau rezolvi reparatii minore prin casa, acest perforator ofera performanta consistenta fara inconvenientul firelor.

La baza functionarii sale se afla un sistem robust de baterie litiu-ion de 12 volti. Aceasta sursa de energie asigura ca instrumentul ramane usor, dar suficient de puternic pentru a gestiona o varietate de sarcini. Designul ergonomic include o maner izolant care enhance siguranta si confortul utilizatorului pe perioade prelungite de lucru. O caracteristica deosebita este PowerLight-ul integrat, care ilumineaza zona de lucru in colturi intunecate, asigurand precizia chiar si in medii dificile.

EasyDrill 1200 ofera doua viteze, permitand utilizatorilor sa treaca intre cuplu mic pentru aplicatii de surubuire si viteza mare pentru gaurirea lemnului, metalului, ceramicii si plasticului. Inelul de cuplu reglabil ofera 20 de setari diferite, oferind control precis asupra cat de strans este condus un surub, prevenind deteriorarea materialelor sau capetele decalate. In plus, mandrina fara cheie permite schimbari rapide si fara unelte ale bitelor, simplificand fluxul de lucru semnificativ.

Siguranta este primordiala in designul acestui dispozitiv. Include un sistem de protectie impotriva suprasarcinii dependent de temperatura care reduce automat viteza daca motorul devine prea cald, protejand atat instrumentul, cat si utilizatorul. Blocarea automata a arborelui mentine mandrina stationara cand declansatorul este eliberat, facand schimbarile bitelor mai sigure si mai usoare. Cu aceste caracteristici gandite, manualul Bosch DIY EasyDrill 1200 ghida utilizatorii prin operatiunea sigura si eficienta de fiecare data.

Note Importante

  • Intotdeauna indeparteaza bateria inainte de a schimba accesoriile.
  • Poarta ochelari de protectie adecvati atunci cand dai gauri.
  • Asigura-te ca piesa de lucru este fixata ferm inainte de a incepe.
  • Foloseste doar incarcatoare recomandate pentru durata optima a bateriei.

Puncte Forte

  • Design usor si ergonomic pentru manipulare confortabila.
  • Cutia de viteze cu doua trepte ofera versatilitate pentru gaurire si surubuire.
  • Lampa LED integrata imbunatateste vizibilitatea in spatiile intunecate.
  • Mandrina fara cheie permite schimbari rapide si usoare ale bitelor.
  • Protectia electronica a celulei previne descarcarea profunda a bateriei.

Puncte Slabe

  • Nu este potrivit pentru gaurirea grea in masonerie fara functie de impact.
  • Capacitatea bateriei poate fi insuficienta pentru joburi continue foarte lungi.
  • Limita de cuplu ar putea fi mai mica decat modelele de grad profesional.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly